Deutsche_Flagge

BBULL IMAGE BK

Threaded Flange Inspection

BBULL IMAGE 120
BBULL IMAGE 120

BBULL IMAGE 120 (Threaded flange)

Multi-camera system for detecting faults on aluminum ROPP screw caps

Einschneider im oberen Bereich
Single tooth
Single tooth
Thread ok
Thread ok
Thread failure
Thread failure
Thread is missing
Thread is missing
Korrekte Gewindeb�rdelung

GENERAL

  • Multi-camera system (3 CMOS cameras with resolution up to 1936x1216 pixels per camera)
  • closure is 3x shown in profile
  • each image is checked for sufficient thread depth, insufficient threads are in the image as fault
    adjustable thread depth > 0.6 mm
  • faulty bottle will be rejected with following rejection system

APPLICATIONS (basic equipment):

  • missing caps
  • to high-closures
  • inclined caps
  • missing threaded flange
  • incomplete threaded flange
  • to weak shaping of threaded flange > 0,6 mm
  • single tooth with threaded flange > 60°
  • damaged safety ring > 60°
  • demolition of safety ring
  • crushed closures
Optional (additional hardware required):
  • fill high control
  • label inspection
  • OCR / OCV
  • capper management
Drawing BBULL IMAGE 120
Drawing BBULL IMAGE 120

BBULL IMAGE 360 (Threaded flange)

Multi-camera system for detecting faults on aluminum ROPP screw caps

Burst open safety ring
Burst open safety ring
Incomplete threaded flange
Incomplete threaded flange
Outburst
Outburst
Demolition of safety ring
Demolition of safety ring
Safety ring break
Safety ring break

GENERAL

  • Multi-camera system (4 CCD cameras with resolution up to 2452x2056 pixel per camera)
  • closure will be 4x recorded and generates a 360 ° complete picture in front view
  • each image is checked for sufficient embossing depth, insufficient embossings are in the image as faulty displayed
    adjustable embossing depth > 0.6 mm
  • faulty bottle will be rejected with following rejection system

APPLICATIONS (basic equipment):

  • missing caps
  • to high-closures
  • inclined caps
  • missing threaded flange
  • incomplete threaded flange
  • single tooth with threaded flange > 60°
  • damaged safety ring
  • demolition of safety ring
  • burst open safety ring
  • scratches, dents, cracks
  • wrong closure color (logo side)
Optional (additional hardware required):
  • fill high control
  • label inspection
  • OCR / OCV
  • capper management
Drawing BBULL IMAGE 360 COMPACT
Drawing BBULL IMAGE 360 COMPACT

THREADED FLANGE INSPECTION

Cause of failure:
Result:
Brochure
PDF Logo