STRATEC
CCI Pressure and Vacuum Inspection by proximity Sensor
up to approx. 60.000 c/h STRATEC CCI
is designed to inspect all kind of metal caps until production speeds till 60.000
c/h.The STRATEC CCI can be used for: 1. Jars with twis-off caps, 2. Bottles
with crown cork and other metal caps, 3. Beverage Cans, 4. Food cans and detects
the following faults:...<
more >
STRATEC
TILTED POSITION DETECTION "Tilted
Position Detection" for Screw Caps, independent of Alignment, Colour and
Cap Material The safeguard of the product quality is of primary
importance of every bottling company. Spoilt products or poor quality causes
annoyance to the customer and loss of image. The correct position of the lid
is an essential factor in ensuring, that the product reaches...<
more >
STRATEC IMAGE (no illustration)
Quality Management with Multifuctional Image Processing STRATEC IMAGE is a flexible all-purpose image processing system for integrated quality
assurance in any automated production line.
The system consists of a central operation
and processing unit STRATEC 4000 and, de
pending on the application, at least one inspection bridge...< more >
STRATEC COMPACT VISION Single Camera System for Fill Level and Cap Quality Inspection on Transparent Containers STRATEC COMPACT VISION is a low-cost camera-based inspection system, specially designed for the quality assurance at the bottling of glass and PET bottles.
Additionally to the underfill and overfill inspection the detection software includes the detection of missing or incorrect applied caps. Thus the majority of faults can be detected, that lead to customer complaints because of wrong filling or leaking bottles...<
more >
STRATEC MAS (no illustration) Leakage Inspection for Crown Caps Among the inspection of underfilled bottles or bottles without seal or label, the inspection of leaking bottles is an essential requirement to quality
assurance in the beverage industry. Leakages influence the quality and durability of products directly and thus are not acceptable for consumers or bottlers. Therefore leakage inspectors are standard products of quality management in the beverage industry....<
more >
