The correct tuning of the conveyor speed, particularly between the various production machines is an important factor in achieving a trouble free operation along the whole bottling line.
The particularly critical points are the bottle buffers, where the transport of the bottles switches from multi- lane in a single-lane tranport, or when synchronization between two machines (Bloc-connection) is necessary.
For an harmonious transport without pressure, with low noise and without gaps, we recommend the BBULL-electronic speed control system BBULL GL.

The systems consists of an electronic control unit witch is installed in the
switch cabinet near by the frequency converters and an operator control panel,
installed at the conveyor. (Operator control panel used for adjustment only)
Optionally the adjustment of the parameters can be done:
    with a laptop computer (menue driven)
     with a very simple operation panel directly in the switch cabinet at the control card.
During normal operation the bottle stream as well as the conveyor speed are continuously
monitored by sensors. Thus the control unit analyzes permanently if the bottles are sliding
(jamming) or if there are gaps.
The speed of the motors, which drive the various conveyors are regulated accordingly.
The system is able to control up to 8 analog outlets simultaneously.

APPLICATION Speed control for conveyors within the bottling line to achieve:
gliding transport from multi-lane      to single-lane		bloc connection between two      production machines in order to      aviod pressure, noise and gaps

OPERATION CONTROL PANEL
simple operation by means of keypad
indication of the input / output via LEDs
adjustment of the parameters optionally with a      laptop computer		malfunction indication in plain text
menue driven operation		big LCD- display (16 lines, each 20 alphanumeric      characters
indication of the transport speed in bottles/hour		text display, changeable by switch to five languages      (D, GB, E, I, F)