BBULL TECHNOLOGY - STRATEC FULL CRATE INSPECTION VK-400 - Full Crate Inspection with Sensor Technology (Diffuse Reflection Sensors) to be installed after the Packer on the Conveyor

BBULL VK-400 with Sensor Technology (Diffuse Reflection Sensors)

Full Crate Inspection System to be installed after the Packer on the Conveyor

GENERAL INTRODUCTION

The last possible time to recognize missing bottles and complete a crate or reject it is between the packer and the palletizer. If a badly crate is merely stacked on the pallet, missing bottles are recognized at the earliest by the customer.
The use of the BBULLb full-crate inspection BBULL VK-400 allows manufacturers to recognize and to sort out incompletely packed crates at full production speeds.
BBULL VK-400 is an universal inspection device, adequate for allmost all current types of crates.
The system is tolerant particularly to vibrating or toppling bottles.
The inspection can be carried out in a lengthwise or crosswise transport under
the sensor bridge. An extensive self-diagnosis of the sensoric in combination with
a malfunctions text display guarantees high reliability and easy operation.
BBULL VK-400 can be easily mounted on existing installation.

Full Crate Inspection System BBULL VK-400 with Sensor Technology (Diffuse Reflection Sensors)

MODE OF OPERATION

The system consists of a sensor bridge and the control unit BBULL VK-400.
For different crate types within a bottling line the height of the sensor bridge
can be adjusted easily. The sensors (standard diffuse reflection sensors) are
                                                                     integrated in the sensor
                                                                     bridge.They are easily
                                                                     adapted to the bottle lines to
                                                                     be inspected.
                                                                     The crate can be transported
                                                                     under the sensor bridge lengthwise or crosswise.
                                                                     The evaluation of the sensor signals, as well as the transfer of a faulty crate to                                                                      the rejection system is carried out by the control unit BBULL PC-400.
                                                                     Because of the highly sophisticated electronic evaluation, there are no special                                                                      requirements for the sensors used. Bottles with high tolerances or toppling                                                                      bottles do not disturbe the inspection process.
When the system recognizes an incomplete crate, a signal is activated to stop the conveyor, to activate an accoustic or optical alarm or to transfer the faulty crate to the rejection unit.